Alternate Mode KAT Percussion Forum

KAT Percussion and Alternate Mode Discussion Forum => Tech help for your KAT MIDI controller(s) => Topic started by: Synchopath on November 07, 2016, 10:19:16 PM

Title: Replacing rubber on PoleKats
Post by: Synchopath on November 07, 2016, 10:19:16 PM
OK, likely beating a dead horse here, but the rubber on my PoleKats turned to goo. They seemed to be triggering fine before their demise. I know Drum Tech is now toast, and that Alt Mode does not handle such things.

It has been suggested to use NuBounce rim pads. Anyone have experience in this, who might be able to talk me through it?

Any help or guidance would be appreciated.

-Jim Battles
The Synchopaths
Title: Re: Replacing rubber on PoleKats
Post by: ANGEYODA on November 13, 2017, 08:50:02 PM
Hi there,
Sorry I only see your post today.

 I had this problem of melting rubber a few years ago.
A friend got me some replacement parts from Drumtech :
you probably can ask them directly : https://www.drumtech.com/electronic-drum-trigger-pads

Sorry and sad nobody told you before.

good luck,