 Search the Knowledgebase |
 Browse by Category |
|
|
|
| View Questions by Category |
There are no sub categories
|
dk10
|
There were 8 questions found in this category:
 How can I easily move foward/backward through all the Editing Functions?
Advance through the various steps by striking the FORWARD pad twice, then each hit after that will advance through the setups. Backup through the various setups by striking the BACK pad twice, then each hit after that will go back through the setups.
- How do I select Kits on the dk10?
To select another Kit, turn your dK10 off. Hold down another Pad while turning the dK10 on. The beep pattern will verify another Kit selection. Play it.
A second, easier way to change Kit selection requires a second, optional footswitch. If you have 2 footswitches, depress both the Edit Note ...
- How do I adjust the bass drum input gain?
How do I adjust the bass drum input gain?
Select one of the 4 preset trigger input gains to accommodate your bass drum trigger pad /pedal.
To Select the Gain
Hold down Pads 9 and 0 at the same time, then depress the Note EDIT Footswitch (while still holding down the 2 pads).
You will ...
- How do I adjust the gate time of the pads on the dk10?
How do I adjust the gate time of the pads?
Software version 1.7 allows you to select one of 4 preset Gate Times.
To change the Gate Time
Hold down Pads 3 & 4 at the same time, then depress the Note EDIT Footswitch (while still holding down pads 3 & 4)
You will hear a beep confirmatio ...
- How do I adjust the pad velocity curves?
How do I adjust the pad velocity curves?
Select one of the 4 preset velocity curves in order to get the best performance from your sound source.
To Select the Velocity Curve
Hold down Pads 7 and 8 at the same time, then depress the Note EDIT Footswitch (while still holding down 2 pads ...
- How do I change pad sensitivity on the dk10?
How do I increase/decrease the sensitivity of the pads?
Software version 1.4 allows you to Increase / decrease pad thresholds. Increasing the sensitivity makes the DK10 more sensitive to light playing.
To Increase the Sensitivity
Hold down Pads 4 and 5 at the same time, then depress th ...
- How do I reset the dk10 (reinitialize)?
The dk10 can be re-initialized back to original Factory settings by simultaneously holding down pads 1, 3, and 4 on power-up.)
- What is the latest software version of for the dk10?
DK10 V1.8 - (software) Pad sensitivity adjustments. 7 different GATE times, Roll Mode, Latch Mode (loops On/Off) and Program Changes.The DK10 os v1.8 Integrated Pad/Set Controller. Pads: 10 FSR pads. Kits: 6 Factory (GM) and 3 User. Inputs: Kick and HiHat Adjustable Trigger Parameters: 4 Prese ...
|
