KAT Percussion Alternate Mode KnowledgeBase

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category
How do you train your HiHat controller pedal in the trapKAT?
User Opinions
0% thumbs up 100% thumbs down (4 votes)

How would you rate this answer?
Helpful
Not helpful
TRAINING YOUR HIHAT PEDAL: When you received your trapKAT it should come preset with the appropriate settings for optimum use of either a hatKAT or a footswitch into your HiHat input (Re-init [how to reinit] should set up these settings properly as well.)  However, if your settings inadvertently get changed, you are using a pedal other than a hatKAT, or you just want to try retraining for your specific pedal, do the following: 1.  Depress the GLOBAL EDIT footswitch. 2.  Hit rimPad17.  The display will say: <<>> 3.  Hit rimPad17 again.  Now beeper goes on and display says: <<>> 4.  So, depress the HiHat pedal and while the HiHat pedal is depressed, hit rimPad17.  The beeper will change and the display will say: <<>> 5.  So, let up on the HiHat pedal and while the HiHat pedal is released, hit rimPad17.  The display will say: <<>> That’s it!  You’ve trained your HiHat pedal! See p.24-25 in the trapKAT manual. Other HiHat topics: Foot Control Assign, Defining Splash, Selecting HiHat pads, Defining Open/Closed/Foot, Defining Splash.
Related Questions
Attachments
No attachments were found.

Powered by ActiveKB Knowledgebase Software