KAT Percussion Alternate Mode KnowledgeBase

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category
How do change the Receive Program Channel in the trapKAT?
User Opinions
45% thumbs up 54% thumbs down (289 votes)

How would you rate this answer?
Helpful
Not helpful
RECEIVE PROGRAM CHANNEL: You can have the trapKAT change Kits under the control of some external device like another controller or a sequencer. To do this you select a Channel to Receive Program Changes on. This Channel must match the Channel that the external device is sending Program Changes to the trapKAT on. (Don’t forget to connect a MIDI cable from the MIDI OUT of the external device to the MIDI IN of the trapKAT. To select the Channel to Receive Program Changes on, simply depress the GLOBAL EDIT footswitch and hit Pad7. Your choices range from OFF (don’t respond to Program Changes on any Channel), ALL (respond to any), to Channels 1 to 16. See p.30-31 in the trapKAT manual.
Related Questions
Attachments
No attachments were found.

Powered by ActiveKB Knowledgebase Software