KAT Percussion Alternate Mode KnowledgeBase

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category
My HiHat isn't working in the trapKAT, now what?
User Opinions
0% thumbs up 100% thumbs down (2 votes)

How would you rate this answer?
Not helpful
Remember, the trapKAT is a MIDI controller - there are no sounds built in at this time. If your trapKAT HiHat isn't playing correctly, try these things to help isolate your problem:
•  See Chapter 6 in the trapKAT manual, “HiHat”.
•  Verify hatKAT or HiHat footswitch is plugged into the hatKAT input on the trapKAT. •  Call up FactoryKit 4 on the trapKAT (See p.9-10).  Verify that the Sound Source is on MIDI Channel 10.  See if pads 7 or 0 act like HiHats.
•  Disconnect the MIDI cable.  Turn the trapKAT and Sound Source Off. Leave all footswitches plugged in.  Turn the trapKAT and the Sound Source back on.  Reconnect the MIDI cable.
•  Try REINITIALIZING your trapKAT (See p.30-32 in the trapKAT manual).

Related Questions
No attachments were found.

Powered by ActiveKB Knowledgebase Software