KAT Percussion Alternate Mode KnowledgeBase

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category
Advanced Search
* Query:
  Categories:
  Rated:
Search Results for "hat"
There were 324 questions found for your query: (Page 9 of 17)     «« | Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | Next | »»
  1. questionWhat is AFTERTOUCH MASH COUNT in the malletKAT?
    AFTERTOUCH MASK COUNT Global Auxiliary Short Cut = # 21 Parameters = 00-64 Performing Aftertouch with mallets can be a bit tricky because of the flexibility of the mallet shafts causing double tri ...

  2. questionWhat is BANK SELECT in the malletKAT?
    BANK SELECT Global Auxiliary Short Cut = # 23 Parameters = Enable, Disable You can choose to disable BANK Change Commands in your malletKAT Pro. This will prevent any Bank Messages from being sent ...

  3. questionWhat is BEEPER in the malletKAT?
    BEEPER Global Auxiliary Short Cut = # 11 Parameters = On/Off You can turn on or off the internal beeper that is heard whenever you are editing or changing Kits. Use the INCrement or DECrement pads ...

  4. questionHow do I use CHAIN MODE in the malletKAT?
    CHAIN MODE Global Auxiliary Short Cut = # 46-49 Parameters = #46 Chain Number 01-16, #47 Chain Step 0-16, #48 Chain Step, #49 Chain Enable Enable/Disable A CHAIN allows you to arrange User Setups ...

  5. questionWhat is CHORD MODE WINDOW in the malletKAT?
    CHORD MODE WINDOW Global Auxiliary Short Cut = # 77 Parameters = 01-20 milliseconds This is a Sensitivity control function when using the MELODY CHORD MODE. The parameters in this screen control h ...

  6. questionWhat is DAMPEN CONTROL SCREENS in the malletKAT?
    DAMPEN CONTROL SCREENS Dampening Control Screens include Dampen Count, Dampen Scan Count, Dampen Ratio and Dampen Threshold. These parameters help the malletKAT to interpret acoustic dampening ges ...

  7. questionWhat is DAMPEN COUNT in the malletKAT
    DAMPEN COUNT Global Auxiliary Short Cut = # 16 Parameters = 0-255  This setting is used to adjust the time between striking a pad and when the pad may be dampened when in DAMPEN MODE. Making ...

  8. questionWhat is DAMPEN MODE SCAN COUNT in the malletKAT?
    DAMPEN MODE SCAN COUNT Global Auxiliary Short Cut = # 43 Parameters = 0-16 This setting is the amount of time the processor takes to scan the signal to decide if the gesture on the pad is a dampen ...

  9. questionWhat is DAMPEN RATIO in the malletKAT?
    DAMPEN RATIO Global Auxiliary Short Cut = # 45 Parameters = 0-255 This screen sets a ratio between the dampen signal and the normal signal. When you apply pressure to the pad, a rise is detected i ...

  10. questionWhat is DAMPEN THRESHOLD in the malletKAT?
    DAMPEN THRESHOLD Global Auxiliary Short Cut = # 15 Parameters = 00-255 This setting is used to adjust the dampening characteristics of the malletKAT when played in DAMPEN Mode. The Dampen Threshol ...

  11. questionWhat is DATA DUMP RECEIVE in the malletKAT?
    DATA DUMP RECEIVE Global Auxiliary Short Cut = # 4 Parameters = Enabled, Disabled You make choose to Enable or Disable the receiving of Data Dumps back into your malletKAT Pro. The normal setting ...

  12. questionWhat is DEBOUNCE COUNT in the malletKAT?
    DEBOUNCE COUNT Global Auxiliary Short Cut = # 14 Parameters = 01-120 Debounce time is the time immediately after a hit has been recognized, where the malletKAT PRO ignores the signal from the pad ...

  13. questionWhat is DEAD STROKE COUNT in the malletKAT?
    DEAD STROKE COUNT DEAD STROKE is like Dampen, but instead of just shutting off  the note on, it also plays another note.  This mimics a Dead Stroke (vibe & marimba players) in that this ...

  14. questionWhat is FINE TUNING ROUTING in the malletKAT?
    FINE TUNING ROUTING Global Auxiliary Short Cut = # 65 Parameters = Both Int & Ext, Neither, External MIDI only, Internal Only. This function routes a FINE TUNING command to the external sound sour ...

  15. questionWhat is FOOT CONTROL ONE PERFORMS in the malletKAT?
    If you don't intend to use the Foot Control Inputs for Volume or other Expression Settings, you may choose to Globally reassign your Foot Control inputs to ADVANCE or BACKUP through your Setups. F ...

  16. questionHow do you use GROOVES in the malletKAT?
    In the GLOBAL AUX Screens described below, you can select whether or not you want the Grooves enabled. You can select the GROOVE that you want to play as well as the tempo and volume of the GROOVE ...

  17. questionWhat is INCOMING CHANNEL ( 1 to 16 ) ROUTE TO in the malletKAT?
    INCOMING CHANNEL ( 1 to 16 ) ROUTE TO Global Auxiliary Short Cut = # 24-39 (channel 1=#24...channel 16=#39) Parameters = Both Int and Ext, Neither, External MIDI only, Internal Only When the malle ...

  18. questionWhat is INCOMING PROGRAM CHANGE RECEIVE in the malletKAT?
    INCOMING PROGRAM CHANGE RECEIVE Global Auxiliary Short Cut = # 6 Parameters = All Channels, OFF, 1-16 The malletKAT PRO maybe set to accept or ignore Program Changes at this screen using the INCRE ...

  19. questionWhat is INCOMING SYSTEM MESSAGE ROUTE TO in the malletKAT?
    INCOMING SYSTEM MESSAGE ROUTE TO Global Auxiliary Short Cut = # 40 Parameters = Both Int and Ext, Neither, External MIDI only, Internal Only This screen lets you select how incoming MIDI SYSTEM ME ...

  20. questionWhat is UNIVERSAL ID in the malletKAT?
    UNIVERSAL ID Global Auxiliary Short Cut = # 13 Parameters = Universal ID, 01-127 The “Individual Instrument ID” for the malletKAT PRO can be assigned at this screen. This setting is us ...

(Page 9 of 17)     «« | Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | Next | »»

Powered by ActiveKB Knowledgebase Software